Type in the default username ( Admin) and password ( Admin), then click Login.In the URL field, enter the device's default IP address.On your computer, open a web browser (for example, Google Chrome).Change the IP settings of your computer to correspond with the device's default IP address and subnet mask.Using a CAT-Se/6 shielded twisted pair (STP) straight-through RJ-45 Ethernet cable, connect any one of the Ethernet ports of the CPU module (rear panel) to the LAN port on your computer.Use the device‘s factory default IP address ( 192.168.0.2/24) and default gateway ( 0.0.0.0) to Initially access the device‘s web interface and change It to suit your network's addressing scheme for subsequent connectivity. Important: We recommend using the static IP address to access the MP1288 web interface. The complete setup for the MP1288 should look like: Contact AudioCodes or another supplier if it's not included: Setup diagram To provision the MP1288 and make it compatible with analog devices, make sure the patch-panel 50-pin Centronics Amphenol cable with a 24-port RJ11 breakout is included in your setup. Protective grounding for connecting a grounding lug for chassis ground connection for ESD-preventive equipment or a grounding wire. (DC-powered models) 2 × DC terminal blocksĬPU module providing the central processing unit and variousįXS blades providing FXS port interfaces.1 × RJ-45-to-DB-9 serial cable adapter for serial communication (AC-powered models) 2 x AC power cords.2 × front-mounting brackets for 19-inch rack mounting.Make sure that the following items (in addition to any separate-orderable items that you may have purchased) are included with your shipped device: Note: Please read before starting the deployment of your Audiocodes MP1288. (2) Obtain the MAC address of the MP1288.(1) Obtain the IP address of the MP1288.Visit the AudioCodes website for more information.

The AudioCodes MediaPack (MP1288) gateway allows you to use a large number of analog devices with Zoom Phone.

Make a zoom with hyper terminal